Rank: Member
Groups: Registered
Joined: 12/28/2009(UTC) Posts: 1
|
While preheating to make a pizza last night my wife says that the oven isn't working right. So I go to see what the problem is. As I'm looking through the oven door window it suddenly looks like someone is welding in there!! Lots of pops, sparks, flame for a short time and plenty of smoke. Ok, so the element has blown but now the digital display isn't working either. Thankfully the stove top still works. How do I tell if it's more than just the oven element that is toast?
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Looks like the heating element got shorted and caused damage to the control board (aka a clock). The solution is to replace both the Bake heating element and the control board. The control board has to be replaced together with the overlay because it's glued on. - The control board Part number: AP4501684
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close