Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
GE - Water Dispenser Stopped Working
Options
Go to last post Go to first unread
Model: GSH25SGRB Brand: GE Age: 1 - 5 years
Previous Topic Next Topic
toofast  
#1 Posted : Monday, December 14, 2009 10:28:43 AM(UTC)
toofast

Rank: Member

Groups: Registered
Joined: 12/14/2009(UTC)
Posts: 2
Hopefully this will make sense...

First of all the ice maker works perfect, so I know the water supply is at least working. However the "water dispener" on the door no longer provides water. I checked and replaced the filter thinking it might be the issue, but it is not.

I am not sure where to start...meaning is the water dispenser a "powered" supply and it is different than the ice maker, etc.

Any help or next diagnostic step would help.

Thanks in advance.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
applianceman  
#2 Posted : Tuesday, December 15, 2009 8:23:21 AM(UTC)
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648
The line inside the freezer door is most likely frozen. Take the line loose at the connector under the door and attempt to get water. If water will flow at that connector the line is frozen. To un-thaw the waterline open the door and press the door switch by hand as if the door were close. Then press the lever to dispense water repeatedly until water flows. This page will help more GE Refrigerators Repair Guide
Back to top
toofast  
#3 Posted : Wednesday, December 16, 2009 4:57:32 AM(UTC)
toofast

Rank: Member

Groups: Registered
Joined: 12/14/2009(UTC)
Posts: 2
Wow...your details and fix worked. It was frozen, go figure.

I have two follow up questions.

1) Do you happen to know if the ice maker uses filtered water, I assume yes, but just want to make sure.

2) Can a layman install the heater fix, I am a bit overwhelmed by trying to figure out how the door and/or dispersor would come out.

Thanks again!
Back to top
applianceman  
#4 Posted : Wednesday, December 16, 2009 5:20:40 AM(UTC)
applianceman

Rank: Member

Groups: Registered
Joined: 3/28/2009(UTC)
Posts: 1,648
The dispenser control just pops off. You can prize it off with a screwdriver from the bottom. The housing behind it is held on by four screws. The heater comes with good instructions and it is easy. Pay close attention on where the instructions say to place the connectors.
Back to top
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET