Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
whirlpool microwave vent fan not working
Options
Go to last post Go to first unread
Model: MH2175XSQ Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
asheborosoccerdad  
#1 Posted : Monday, March 10, 2008 6:25:06 PM(UTC)
asheborosoccerdad

Rank: Member

Groups: Registered
Joined: 3/10/2008(UTC)
Posts: 1
my vent fan just stopped working, the display says the fan is on but nothing happens.
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Gene  
#2 Posted : Tuesday, March 11, 2008 2:00:15 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The problem could be a bad fan motor or a bad control board.

Perform the troubleshooting as described in the service manual (pages 7 & 10).

- The part number for the control board is AP3951232

- The part number for the fan motor is AP3964272

Gene.

P.S. The above link does not work any more. The tech sheet is attached to the post.
File Attachment(s):
Tech Sheet - 8206560 _ MH2175XSQ0.pdf (593kb) downloaded 61 time(s).
Back to top
edwards  
#3 Posted : Saturday, March 29, 2008 7:56:59 PM(UTC)
edwards

Rank: Member

Groups: Registered
Joined: 3/29/2008(UTC)
Posts: 1
Whirlpool MH1150XMT-0 Fan will not run when oven is on unless you manually press fan and then only on high. No low speed. Bad door switch ? fan hi low switch or relay?
Back to top
Gene  
#4 Posted : Tuesday, April 1, 2008 8:23:05 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Hi Edwards,

Most likely the problem is a bad control board.

- The part number for the control board is AP3885533

Here are the break down diagrams for the Whirlpool microwave Model MH1150XMT0

Gene.
Back to top
mofire237  
#5 Posted : Sunday, April 29, 2012 6:16:57 AM(UTC)
mofire237

Rank: Member

Groups: Registered
Joined: 4/29/2012(UTC)
Posts: 1
The fan on our Whirlpool Microwave MH2175xsq0 stopped running today. When I try to manually run it the word SOUP appears on the display. The rest of the functions on the control panel work fine. Down to the fan?
Back to top
Gene  
#6 Posted : Sunday, April 29, 2012 3:08:19 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
Sounds like the problem is a bad control board, but you may want to perform the troubleshooting as described in the attached tech sheet (page 7 & 9).

- The control board Part number: 8206619
Part number: 8206619



Here are the breakdown diagrams and Replacement parts for Whirlpool MH2175XSQ0 Microwave Oven 1.7 Cu. Ft. | AppliancePartsPros.com

Gene.
File Attachment(s):
Tech Sheet - 8206560 _ MH2175XSQ0.pdf (593kb) downloaded 18 time(s).
Back to top
Users browsing this topic
Guest (2)
Similar Topics
Whirlpool microwave vent fan not working (Microwave Repair)
by mshaw8099 7/22/2015 2:07:41 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET