Water won't drain completely resulting in rancid smell - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Water won't drain completely resulting in rancid smell Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 4000 SERIES	Brand: Frigidaire	Age: 1 - 5 years
Previous Topic Next Topic

cmccloskey79		#1 Posted : Monday, November 30, 2009 12:40:01 PM(UTC)
Rank: Member Groups: Registered You have been a member since:: 11/30/2009(UTC) Posts: 2		I have a Frigidaire 4000 Series Aqua Surge dishwasher. The water won't drain completely upon completion of the cycle -- I lift up the filter and there's 1+ inch of water left in the bottom. As a result, there's a rancid smell from the standing water. I had a repairman come and look at it and he said that the dishwasher was installed correctly, operates correctly, and that there's nothing that can be done. He said it's designed that way. I've had several dishwashers before and this never happened. Any suggestions other than purchasing a new dishwasher?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Tuesday, December 1, 2009 12:24:35 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		A Model Number may help others help you.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

cmccloskey79		#3 Posted : Tuesday, December 1, 2009 3:39:53 PM(UTC)
Rank: Member Groups: Registered You have been a member since:: 11/30/2009(UTC) Posts: 2		Model Number: PLD4375RFC2. Please help!


User Profile View All Posts by User View Thanks

denman		#4 Posted : Tuesday, December 1, 2009 4:30:55 PM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Motor & pump replacement parts for FRIGIDAIRE PLD4375RFC0 Frigidaire/dishwasher \| AppliancePartsPros.com Here is a service manual http://frigidaireservicetips.com/pdfs/463_9.pdf Here is the install sheet http://manuals.frigidaire.com/p...df/Kinston/154427301.pdf Make sure the drain is looped up as in the install sheet. Since the water is skunky it may be that it is being siphoned back into the unit from the drain. Check that the drain is clean. If OK Remove and inspect the drain pump especially the flapper valve if it has one.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close