Customer Support 7 days a week

Welcome Guest! You can not login or register.



Go to last post Go to first unread
#1 Posted : Tuesday, May 21, 2024 6:06:03 PM(UTC)

Rank: Member

Groups: Registered
Joined: 5/21/2024(UTC)
Posts: 0

I have a GE Profile wall oven, MW on top, oven on bottom. It is 1.5 years old and haven't baked in it more than 12 times. The display panel shows "Communications Error with Lower Oven" when bake is selected on control panel.
Under warranty GE replaced a control board on the MW, worked for two times then error occurred again out of warranty about 6 mos later. Had a different repair company out and they replaced the touch panel first, without change, then replaced the oven control board and oven harness. Worked for 1 bake cycle and failed again after ~ 3weeks. GE is absolutely no help. Anyone seen this problem before or have any ideas?
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
WilliamM/APP Team  
#2 Posted : Thursday, May 23, 2024 11:20:40 AM(UTC)
WilliamM/APP Team

Rank: Member

Groups: Moderators, APP Team, Registered
Joined: 2/27/2024(UTC)
Posts: 0
United States
Location: TN

Was thanked: 14 time(s) in 14 post(s)
68Catcar, based on the information provided, the failure is in the bridge control WB27X25692. This is based on the main control, the oven control next to the bridge board, and the oven harness being replaced while the failure still occurs.
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.