How to pull microwave out of mw/oven combo - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

How to pull microwave out of mw/oven combo - RMC275PVS01 light bulb change Options Email this topic Watch this topic Print this topic » Normal Threaded
Previous Topic Next Topic

cromking		#1 Posted : Monday, May 6, 2024 1:13:05 PM(UTC)
Rank: Member Groups: Registered Joined: 5/6/2024(UTC) Posts: 0 Location: Oklahoma		I have watched the video how to change the bulb(WPW10440740) on a microwave/oven combo and mine looks a lot like it. I removed the upper and lower vent grills and removed the two screws at the bottom holding it in. I even removed a lot of unnecessary screws, but it is not budging. Does anyone have any clues? I feel like there must me screws at the back or sides holding it in. Taking the entire oven out is going to be a huge task that I am trying not to do unless absolutely necessary.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

WilliamM/APP Team		#2 Posted : Tuesday, May 7, 2024 8:30:11 AM(UTC)
Rank: Member Groups: Moderators, APP Team, Registered Joined: 2/27/2024(UTC) Posts: 0 Location: TN Was thanked: 14 time(s) in 14 post(s)		Cromking, the microwave support rails do have screws at the back. If the microwave does not lift up slightly and pull forward, the wall oven would need to be pulled out just enough to remove the side panels to access the microwave.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close