Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Kevin Arthur  
#1 Posted : Tuesday, March 26, 2024 3:54:40 PM(UTC)
Guest

Rank: Guest

Groups:
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
Our GE Profile refrigerator stopped refrigerating last week.
I noticed that the frozen food in the freezer had thawed out.
Temps in both compartments slowly but steadily climbed as time passed.

The evaporator fan didn't seem to be running, and the "Repair Help" information here seemed to concur that that was a likely cause, so I ordered a new evaporator fan and freezer temperature sensor (just to cover that possibility), and replaced them this past Saturday (March 23).

Note: We have the lower freezer drawer unit. The evaporator coils were ice free when I did the repair, although the unit had been steadily climbing heat-wise and with no evap fan running, it's entirely possible any ice buildup might have melted away. There was no massive ice buildup on the back wall at any point though.

After I did the repair and plugged it back it in, all seemed well. Temps dropped steadily overnight. Temps were around 0 (freezer) and 35 (refrigerator). Great! Looking good!

Then very late Sunday night/Monday morning freezer temps started climbing for no apparent reason. I just assumed it was a defrost cycle or something. 12...17...20 - all the way to 35 degrees. Too high to be defrost cycle. Can't have food constantly thawing and freezing.

But by Monday morning, temps were back to (-1 to ~4) freezer; 34/35/36 refrigerator. So all good. Maybe it was just a hiccup?

Up until today (Tues) morning, when temps started rising again:
7:30 AM 9 deg/35 deg
8:00 12/35
9:30 22/36
10:30 26/37
11:45 31/38
1:15 PM 34/40
2:30 38/42
3:30 40/43
4:30 42/44

Evaporator fan has been running most if not all of this time. I can't tell about condenser fan in the back as unit is in an alcove in the wall, so very hard to say about that.

Any suggestions as to what the issue might be now given that I've replaced the above two "most likely" items?

Thank you anyone for your help!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.