Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Jolene  
#1 Posted : Thursday, January 26, 2023 9:44:03 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
We have a GE dishwasher model GDF640HSM0SS
It has a dead UI.

We checked that the main control board LED was flashing, so it's getting power.
We determined that the main control board was sending about 13V to the UI board.
We also checked that the signals from the door latch were registering continuity when closed.

We assumed that the UI board must be faulty and replaced it. Model number of UI board is WD21X31898.

It is still dead. There are no lights on the UI board.

We probed some points on the UI board and it has some voltage, so the cable is delivering voltage to it, but we haven't probed if it is indeed full 13V. We just assumed that the board must be getting some power because I do see a voltage drop across two points.

Do I need jumpers for this model to set a personality? No such instructions came with the part.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.