Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Guest  
#1 Posted : Sunday, July 10, 2022 1:22:03 PM(UTC)
Guest

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 4 time(s) in 4 post(s)
all 3 door switches have been replaced. Some buttons such as START, CANCEL, KEEP WARM, ADD MINUTE. No beep or response when pressed. Sometimes the unit will work and sometimes will not.

This unit has two boards inside + the main control panel.

Not sure which one is the issue. It can get really costly replacing all.

Any ideas?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ThatGuy  
#2 Posted : Saturday, July 16, 2022 7:46:27 PM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
I would suspect the control panel. You might try re-seating the flat connector, sometimes that works. Does it look like this?

https://www.genuinerepla...1f4e174319e6a1369ba127d3
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.