Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Banging clunking after clutch replacemet
Options
Go to last post Go to first unread
Brand: -brand- Age: Less than 1 year
Previous Topic Next Topic
fromindy  
#1 Posted : Saturday, November 7, 2009 10:45:53 AM(UTC)
fromindy

Rank: Member

Groups: Registered
Joined: 11/7/2009(UTC)
Posts: 4
I firt wanna thank everyone because this website helped me when I fixed my dryer.
Yesterday I replaced motor coupler and clutch assembly. I put everything together but now the tube bangs to sides.I am thinking that Washer, spin tube thrust
Part Number: AP2905330 made by WHIRLPOOL
was put upside down wrong.The recessed part should be on tranny side right ?

Do you think that this causes banging/clunking on sides.Can springs go bad while I lay the washer on the ground?

Thanks
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
fromindy  
#2 Posted : Saturday, November 7, 2009 10:53:04 AM(UTC)
fromindy

Rank: Member

Groups: Registered
Joined: 11/7/2009(UTC)
Posts: 4
Back to top
fromindy  
#3 Posted : Saturday, November 7, 2009 12:05:43 PM(UTC)
fromindy

Rank: Member

Groups: Registered
Joined: 11/7/2009(UTC)
Posts: 4
Ok I got it.. Spring should be upside down and the recessed part should face to tranny.
Back to top
fromindy  
#4 Posted : Saturday, November 7, 2009 12:53:31 PM(UTC)
fromindy

Rank: Member

Groups: Registered
Joined: 11/7/2009(UTC)
Posts: 4
Yes I works fine now..But I still have a burning smell..
Back to top
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET