Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



New Topic Post Reply
Go to last post Go to first unread
#1 Posted : Sunday, December 5, 2021 11:38:26 AM(UTC)

Rank: Guest

Groups: Registered
Joined: 8/10/2018(UTC)
Posts: 0
United States
Location: 99556

Was thanked: 3 time(s) in 3 post(s)
I have an old Maytag gas dryer model DG9800. It takes 1.5 hours to dry a regular load, with some parts of clothes still being a little damp. The inside temperature is just warm (95-100 F) after 20 minutes of running, and the temperature reaches 120F after 1 hour. Based on my observations, the flame went off too soon, before the temperature reached the target. I checked the vent from outside and the air seemingly went out fine. I have installed a new cycling thermostat, new solenoid coils, and a new hi-limit thermostat, but it makes no difference. What else could be wrong? Thanks.
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.