JDS1750FS oven not reaching oven temperarture - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

JDS1750FS oven not reaching oven temperarture - When I set the oven to a specific temperature, it falls short by about 30-75 degress Options Email this topic Watch this topic Print this topic » Normal Threaded
Previous Topic Next Topic

Guest		#1 Posted : Wednesday, November 24, 2021 1:06:18 PM(UTC)
Rank: Guest Groups: Registered Joined: 8/10/2018(UTC) Posts: 0 Location: 99556 Was thanked: 4 time(s) in 4 post(s)		I recently purchased a used JDS1750 FS Range. Since having it installed, we've tried using the oven a few times and find that the oven gets stuck in preheat mode, about 30-75 degrees below where it should be. The oven itself has no problem reaching our desired temps, however, we have to go above what we are wanting to set it to in order to achieve that. IE: if i want it set to 350f, it only gets to about 300, but if I set it to 425F, i can get it to 350F but it still remains in "pre-heating" mode as per the display on the screen. Any ideas on what this could be?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close