Hi,

A couple months back the front panel popped up some other error code so I popped it open, disconnected and reconnected wires, entered service mode, cleared error and we were good. Fast forward 2 months, we now have a new error code E0000 which is supposedly a mismatch between control module and front panel and it's supposed to be resolved by entering into the service mode (enter+1+bake). I first repeated the original steps but I'm not able t enter the service mode. I found my way to the main control module and have disconnected all the connectors on the board, let it sit unconnected for 5 minutes, and reconnected. Still the error persists and I can't enter service mode to clear the error code.

Any advice?

Edited by user Thursday, October 28, 2021 2:41:44 AM(UTC)  | Reason: Not specified