Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
B-Odonnell  
#1 Posted : Wednesday, September 16, 2020 7:08:37 AM(UTC)
B-Odonnell

Rank: Member

Groups: Registered
Joined: 2/7/2016(UTC)
Posts: 2

Here's a puzzling situation. About a month ago we did a repair where we swaped the thermostat module for a Peerless range (Gas only design) after their report that it was both not consistently getting up to temperature, plus the range pilots wouldn't light. The replacement fixed the pilots, and when we did a test fire, the oven hit the target temp of 350 in seven minutes.
However we were just informed that a few days ago when they fired it up with the target temp of 400, the oven took exceptionally long to start firing, and didn't reach 400 for nearly 40 minutes.
Looking at the discrepency in timing, the only think I can think that we may have done differently is cracking open the broiler tray during the test firing (To better hear the oven firing.)
Any advice on what I can do to try and figure this out?

Thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.