Set-in oven won't turn off. - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Set-in oven won't turn off. Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: RBD305PD Q1	Brand: Whirlpool	Age: More than 10 years
Previous Topic Next Topic

tdtk42		#1 Posted : Friday, November 6, 2009 7:29:02 AM(UTC)
Rank: Member Groups: Registered Joined: 11/6/2009(UTC) Posts: 2		I just replaced the baking element on bottom of unit. A few days later decided to start the self clean process. Baking element will not turn off since cleaning was finished. Any ideas?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Saturday, November 7, 2009 5:18:18 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Replacement parts for WHIRLPOOL RBD305PDQ1 \| AppliancePartsPros.com I am assuming that the only way to turn it off is to trip the breaker. Is the element on full heat? If yes then odds are high that you need a new control board. Either it's electronics are shot or the bake relay's contacts are welded together. If it is on at a lower heat or only part of it is heating, it could be that it is some how shorting to the frame. Then it will get 120 volts all the time. Sometimes this can happen through the feet of the element.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

tdtk42		#3 Posted : Saturday, November 7, 2009 8:14:53 AM(UTC)
Rank: Member Groups: Registered Joined: 11/6/2009(UTC) Posts: 2		You are correct. It was the control panel. I decided to buy a new oven rather than spend the money for a new control panel. Thanks!! Originally Posted by: denman Here are your parts Replacement parts for WHIRLPOOL RBD305PDQ1 \| AppliancePartsPros.com I am assuming that the only way to turn it off is to trip the breaker. Is the element on full heat? If yes then odds are high that you need a new control board. Either it's electronics are shot or the bake relay's contacts are welded together. If it is on at a lower heat or only part of it is heating, it could be that it is some how shorting to the frame. Then it will get 120 volts all the time. Sometimes this can happen through the feet of the element.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close