Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
bwooden  
#1 Posted : Wednesday, May 20, 2020 11:03:07 AM(UTC)
bwooden

Rank: Member

Groups: Registered
Joined: 5/20/2020(UTC)
Posts: 0
United States
Location: ILLINOIS

Hello all, I have a brand new 5 year old Maytag that was finally installed about 2 months ago. Bought it as a set, remodel was pushed off, finally done now, and finally have dishwasher installed. Model Number is MDB8969SDM2. I have a "leak" on the left side of the machine and I found it because my brand new cabinets to the left of the dishwasher have rotted out. I pulled out the machine, and it appears steam/condensation is escaping from the two square holes on top of the gray inlet valve. I can't find any other vent on the dishwasher, so I think steam is forcing its way out the inlet valve. I've seen a few older forums with the same issue but no fixes. Can I tape over or plug those two holes?? The place I bought it from, as well, as Maytag has been less than helpful. Thanks for any help. I have pics but don't know how to upload.

Ben
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.