Kenmore model 11060022010 electric dryer no heat - Appliance Repair Forum

Welcome Guest! To enable all features please Login or Register.

Notification

Error

New Topic Post Reply

Kenmore model 11060022010 electric dryer no heat - first low heat then no heat Options Email this topic Watch this topic Print this topic » Normal Threaded
Previous Topic Next Topic

mike5466		#1 Posted : Friday, May 1, 2020 10:29:22 AM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 5/1/2020(UTC) Posts: 0		My Dyer is not heating. Good Air Flow; check the continuity of : heating element, thermal fuse, high limit thermostat, thermal cut off, operating thermostat; they are fine; followed the advice of the forum and replaced the timer; still no heat. What should I check next? Thanks.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

mike5466		#2 Posted : Wednesday, May 13, 2020 6:04:10 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 5/1/2020(UTC) Posts: 0		I replaced the heating element(although the old one's continuity tested just fine) and it works now but only on timed dry (and it takes longer than usual, i.e., have to start on the 60 minutes on high heat mode); it does not work on the auto dry mode. Not sure what causes the problem. operating thermostat? The flexible vent tube feels hot when it runs. Could this be caused by the air flow? Any idea? Thanks.


User Profile View All Posts by User View Thanks

Quick Reply

Show Quick Reply

Users browsing this topic
Guest

New Topic Post Reply

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close