AppliancePartsPros.com
»
Appliance Repair Help
»
Dryer Repair
»
Dryer Not Heating even tough Fuse and Heating Element is good
Rank: Member
Groups: Registered
Joined: 3/17/2020(UTC) Posts: 0 Location: nj
|
I have a Kenmore Dryer Model #110.612020111. The blower fuse has continuity as does the heating element yet it will not heat. Any constructive thoughts? Is there something on the switch panel I should be testing? can't figure it out.
Thanks, Mick
|
|
|
|
Rank: Member
Groups: Registered
Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)
|
Have you checked continuity on both the thermostat and high limit thermostat on the heating element case? Have you checked continuity on the cycling thermostat on the fan side (the two large connectors) the two small connections are used to reduce the heat needed to cycle off.
|
|
|
|
AppliancePartsPros.com
»
Appliance Repair Help
»
Dryer Repair
»
Dryer Not Heating even tough Fuse and Heating Element is good
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close