Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
shokwaves  
#1 Posted : Thursday, November 5, 2009 4:27:05 PM(UTC)
shokwaves

Rank: Member

Groups: Registered
Joined: 9/30/2009(UTC)
Posts: 14

After replacing the oven bake ignitor and sensor, oven still does not work

I just received the new ERC touchpad. Can anyone walk me through how to remove the old one and replace it with the new one?

Thanks!
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
shokwaves  
#2 Posted : Thursday, November 5, 2009 5:07:37 PM(UTC)
shokwaves

Rank: Member

Groups: Registered
Joined: 9/30/2009(UTC)
Posts: 14

I figured out how to replace the ERC, a/k/a ECU or touchpad (the part with the clock and keypad). It was tricky but do-able. However, bake feature is still not working nor does the ignitor work. The convect feature is very slow to heat. The broil function does work fine.

Before the new ERC touchpad installed, I was getting a code of F1.4. Now, that is gone, but the display says 03.0. What gives?

Any feedback or suggestions are welcome.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.