Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
bhorv67  
#1 Posted : Tuesday, November 13, 2018 9:28:24 AM(UTC)
Quote
bhorv67

Rank: Member

Groups: Registered
Joined: 11/13/2018(UTC)
Posts: 0
United States
Location: IL

The lower spray arm has a rotating spray wheel on the end of the arm. The wheel spins freely and so does the arm. The problem is when the cycle is running, the arm stays in one place while the spray wheel spins. The arm should rotate around. It's not stuck, I can move the arm, and if I do and close the door again, the arm will rotate one time and stop in the same place. there's nothing blocking the arm that I can find. I've cleaned all the lower arm parts and can confirm there is no food blocking the water.

There's a plastic part that locks the spray arm assembly to the bottom of the washer. I can be locked in place in 2 different places (180 degrees opposite). If I put the plastic part on the opposite side, the spray arm will then stop in a different place, but will not rotate around during the cycle.

I've had a repair tech look at the washer but couldn't find what the problem is.

Appreciate any help. thanks
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.