Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.



Go to last post Go to first unread
belfair laundry  
#1 Posted : Saturday, June 2, 2018 3:32:25 PM(UTC)
belfair laundry

Rank: Member

Groups: Registered
Joined: 6/2/2018(UTC)
Posts: 2

i have to commercial gas dryers that are not getting hot i have changed out the thermostats, thermister, igniter, sail switch and i have checked the solenoids i'm on to removing the flame sensor but the screw is stuck and i cant get it out no matter what i do i'm not sure what it could be if its not that any help would be amazing. Its a large commercial Maytag dryer. or if you know hot to get a screw out of metal in a very tight spot.
See inside of your appliance - diagrams and part photos for virtually every model.

powered by
Users browsing this topic
Similar Topics
Igniter, flame sensor, soleniods, thermal sensor all OK - but no heat (Dryer Repair)
by silentrunningpc 9/1/2016 4:34:36 PM(UTC)
No power to flame sensor, gas valves, or ignitor (Dryer Repair)
by ms0674 8/9/2014 2:37:45 PM(UTC)
Dryer Flame Sensor (Dryer Repair)
by TomHam 9/3/2013 1:00:20 PM(UTC)
Replaced gas coil, ignitor, flame sensor.. (Dryer Repair)
by dspcr 8/16/2013 4:12:54 PM(UTC)
flame stays lit for a few (20) seconds then goes out. could it be the flame sensor? h (Dryer Repair)
by grubxx96 11/11/2011 1:01:45 PM(UTC)
Kenmore replaced coils,ignitor,and flame sensor still no heat. (Dryer Repair)
by cfreeman 12/30/2010 10:31:48 AM(UTC)
Thermal fuse and Flame sensor wiring (Dryer Repair)
by cwizzards 5/7/2010 10:22:30 AM(UTC)
Dryer Flame Sensor (Dryer Repair)
by Dangilligan 9/9/2009 5:34:55 PM(UTC)
relpaced coils and flame sensor and no heat (Dryer Repair)
by mjl 7/3/2009 2:20:19 PM(UTC)
Wiring Flame Sensor (Dryer Repair)
by TomGJohnson 6/9/2009 2:29:13 PM(UTC)
New flame sensor failure? (Dryer Repair)
by spiderberg 4/1/2009 6:54:40 AM(UTC)
Flame sensor (Dryer Repair)
by redrwut 2/21/2009 9:18:14 AM(UTC)
Which wire to which terminal on the flame sensor? (Dryer Repair)
by supertramp 1/13/2009 2:22:16 PM(UTC)
flame sensor (Dryer Repair)
by sarrah76 1/9/2009 9:37:57 AM(UTC)
flame sensor (Dryer Repair)
by sarrah76 1/9/2009 9:35:50 AM(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.