Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
Arcing Sound
Options
Go to last post Go to first unread
Model: WHM73521CW0 Brand: Whirlpool Age: 1 - 5 years
Previous Topic Next Topic
RMPPOD  
#1 Posted : Wednesday, February 21, 2018 9:35:52 AM(UTC)
RMPPOD

Rank:: Member

Groups: Registered
Joined: 2/21/2018(UTC)
Posts: 2
Was hearing arcing sound as food was cooking. Eventually the arcing got worse and the microwave shut down after 30 seconds or so of cooking. The microwave was reset and again shutdown after a few seconds of cooking. I suspect the waveguide cover as being the part causing this problem. After unseating the cover, I noticed some silicon type gasket material around the waveguide aperture. Is there a gasket or other sealing material required when replacing the cover? Attached is a photo of the material I found.



Thanks for any input concerning replacing the waveguide cover and arcing.



RMPPOD
RMPPOD attached the following image(s):
20180220125600001800x600.jpg
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
RMPPOD  
#2 Posted : Thursday, February 22, 2018 7:53:53 AM(UTC)
RMPPOD

Rank:: Member

Groups: Registered
Joined: 2/21/2018(UTC)
Posts: 2
I am thinking the material may be RTV. Has anyone found RTV applied under a wave guide cover?
Back to top
ThatGuy  
#3 Posted : Thursday, March 1, 2018 9:59:17 AM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
It is a type of silicone. I don't see any burned spots on the inside of the wave guide. Is it burnt on the outside?

If its arcing inside the wave guide, that's bad. If its burning off the end of the magnetron that's even worse.
Back to top
Users browsing this topic
Similar Topics
MW won't heat, had prior arcing sound (Microwave Repair)
by pennstatejeff 3/3/2008 7:53:06 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET