Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
Db123  
#1 Posted : Tuesday, December 26, 2017 5:14:47 PM(UTC)
Db123

Rank: Member

Groups: Registered
Joined: 12/26/2017(UTC)
Posts: 1

Washer intermittently partially fills then stops, meaning it won't advance to agitate. Sometimes does this on initial fill, sometimes when filling to rinse. Can get it to agitate by advancing the timer and pushing start. Can't seem to figure this out. Control board is expensive and I don't want to guess what's wrong
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
rickirick  
#2 Posted : Saturday, January 20, 2018 2:41:19 PM(UTC)
rickirick

Rank: Member

Groups: Registered
Joined: 1/20/2018(UTC)
Posts: 1

I have the same problem. Seems to happen most often on delicate cycle. Tub fills and then stops. Not sure if it is 50% full or 100%, just know that it stops and does not proceed. One difference from your issue is that I have only noticed this during the initial tub fill, not during rinse fills.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.