Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
pdrayton  
#1 Posted : Monday, October 30, 2017 2:27:37 PM(UTC)
pdrayton

Rank: Member

Groups: Registered
Joined: 10/30/2017(UTC)
Posts: 1

When run in diagnostic or regular cycle, the circulation pump only runs every so often. I can hear the relays clicking, but the pump doesn't always run.

I have put 110v directly to the pump motor and it runs fine.

The control board was quite dirty when I pulled it out - cockroach poop and carcasses. Cleaned it up and put it back in.

Diagnostic mode came back with error 6-4 which is a water level issue. I re-leveled the dishwasher and that error doesn't come up anymore. No errors after a diagnostic run at the moment.

So is this a bad pump (how?) or a bad control board, or something else? Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.