Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Options
Go to last post Go to first unread
sryan17  
#1 Posted : Thursday, September 21, 2017 9:19:55 PM(UTC)
sryan17

Rank: Member

Groups: Registered
Joined: 9/21/2017(UTC)
Posts: 2

Dishwasher stops approx. 45-60 minutes in to cycle and start/pause button flashes. If I press it, it starts back up again but stops and begins to flash again after running for a while. I end up having to cancel/drain. Cannot get it to run a full cycle. Tried the diagnostic (heated dry,normal,heated dry, normal) and all LED lights on the panel light up. I closed the door and it is running what I assume is a diagnostic cycle now. Any ideas? REALLY hoping to not have to replace the control board.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
sryan17  
#2 Posted : Thursday, September 21, 2017 9:27:30 PM(UTC)
sryan17

Rank: Member

Groups: Registered
Joined: 9/21/2017(UTC)
Posts: 2

I would just like to add that the diagnostic cycle finished, and all lights turned off so no error code displayed.
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.