Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
mingd  
#1 Posted : Wednesday, June 28, 2017 1:36:23 AM(UTC)
mingd

Rank: Member

Groups: Registered
Joined: 4/25/2016(UTC)
Posts: 6

Looking for some confirmation of what part might be bad while troubleshooting a single burner that won't light on this gas stove.
The most used burner is not regularly igniting (front right) with the use of the knob. If I let the gas run for a few seconds and then turn it to light it is possible to get it to fire but that is becoming more difficult. I have tried cleaning everything I could see but that has not helped at all.
I am not sure if it is just the igniter that is bad and it is a cheap fix or it is a more complicated repair with more expensive parts.
All knobs elicit a clicking but this one burner won't light easily.
Any insight appreciated.
Much thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
mingd  
#2 Posted : Thursday, June 29, 2017 10:39:16 AM(UTC)
mingd

Rank: Member

Groups: Registered
Joined: 4/25/2016(UTC)
Posts: 6

Actually I am wondering if it is as simple as this part:
Kenmore Range/Stove/Oven Spark Electrode WB13K10014

Should I try replacing this first and then the igniter if unsuccessful?
Should I test resistance on these parts to see if they are still functional?
Gene  
#3 Posted : Thursday, June 29, 2017 3:37:29 PM(UTC)
Gene

Rank: Advanced Member

Groups: Senior Expert, Administrators
Joined: 7/19/2007(UTC)
Posts: 27,455

Was thanked: 4 time(s) in 4 post(s)
The spark electrode part number you posted is made by GE for GE products. Your range made by Frigidaire. I don't think they are interchangeable.

How good is the spark when you turn the knob to the light position?

If the spark is really strong then the problem could be clogged lighting hole in the top burner. Try to clean it or just replace the burner. It's absolutely inexpensive.

If the spark is weak, the igniter and orifice assembly would need to be replaced. For some reason, Frigidaire would not sell the igniter separately.


The top burner Part number: AP2126444
Part number: AP2126444




The igniter and orifice assembly Part number: AP4362358
Part number: AP4362358




Good luck.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.