Rank: Member
Groups: Registered
Joined: 2/18/2008(UTC) Posts: 2
|
My dishwasher has been leaking everywhere, I can't see any problem with the seal but I can't figure out what could be wrong with it. There is no seal on the bottom of the door of the dishwasher but I don't know if that is normal.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Were you able to pinpoint the leak?
It was leaking through the door or from under the dishwasher?
Gene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/18/2008(UTC) Posts: 2
|
It is leaking through the door, right at the bottom of the door.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/20/2008(UTC) Posts: 3
|
I am having the same problem. Mine appears to be a problem with the seal, as there is soapy residue on the exterior of the the seal on the inside of the door (where water should get to). Only, I don't know how to fix it...
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/20/2008(UTC) Posts: 4
|
My dishwasher is leaking form the bottom right side. :mad: It is a whirlpool Gold model appox. 6 years old.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hi dcooker85,
Most likely the water leak through the door on your dishwasher caused by excessive suds from a wrong ( not designed for automatic dishwasher) soap.
Start the dishwasher, wait about 30 sec and open the door. You should see suds inside.
Gene.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hi pizzledizzle123,
In order to provide the most accurate advise I need the complete model number of the dishwasher.
Post it as a new thread, please.
Gene.
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hi Don,
In order to provide the most accurate advise I need the complete model number of the dishwasher.
Post it as a new thread, please.
Gene.
|
|
|
|
Rank: Member
Groups: Registered
Joined: 2/20/2008(UTC) Posts: 4
|
Hi Gene, This is a reply to your response. My dishwasher is leaking form the bottom right side. :mad: It is a whirlpool Gold model appox. 6 years old. The model number is GU940SCGT3. Thanks for your response.
Don Evans
|
|
|
|
Rank: Advanced Member
Groups: Senior Expert, Administrators Joined: 7/19/2007(UTC) Posts: 27,455
Was thanked: 4 time(s) in 4 post(s)
|
Hi Don, Remove the inner door panel and check the soap dispenser latch (#2 on the inner door break down diagram) for the leakage marks. If there are any marks - replace the latch. - The part number for the latch kit is AP3130817 Here are the break down diagrams for the Whirlpool dishwasher Model GU940SCGT3Gene.
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close