Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
jimctec  
#1 Posted : Wednesday, March 8, 2017 2:32:20 PM(UTC)
jimctec

Rank: Member

Groups: Registered
Joined: 6/6/2016(UTC)
Posts: 18

I originally found this GE FL washer completely dead. The owner said they had a power outage, and when power resumed washer wouldn't power up. I found a blown fuse soldered into main board. Main board was replaced, unit now powers up, starts cycle, fills and will drain, but it does not tumble or spin. Wont operate in tests 10 or 11. Motor reads ~16 ohms for each phase wire pairing. Can't find power out to motor at any time...:confused:
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
brobriffin  
#2 Posted : Wednesday, March 8, 2017 5:10:55 PM(UTC)
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
Some of these units have an inline fuse, from the control panel to the motor, that may need replaced.
jimctec  
#3 Posted : Thursday, March 16, 2017 9:11:14 AM(UTC)
jimctec

Rank: Member

Groups: Registered
Joined: 6/6/2016(UTC)
Posts: 18

Negative on an inline fuse; further testing has led us to believe the new control board is defective. Awaiting a replacement...
jimctec  
#4 Posted : Wednesday, March 29, 2017 12:27:18 PM(UTC)
jimctec

Rank: Member

Groups: Registered
Joined: 6/6/2016(UTC)
Posts: 18

Second new control board made no difference. Further testing led to replacement of the Hall sensor, which seems to have cured the problem..
Users browsing this topic
Guest (4)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.