Cabrio UL Code - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! To enable all features please Login or Register.

Notification

Error

New Topic Post Reply

Cabrio UL Code Options Email this topic Watch this topic Print this topic » Normal Threaded
	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

dosmond		#1 Posted : Wednesday, March 1, 2017 1:58:14 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 3/1/2017(UTC) Posts: 2		I purchased a suspension kit from this site and installed them this evening. The washer still gets a UL code when spin is around 9 minutes left. This happens even if nothing is in the washer. At slow spin it appears balanced but once it goes into a faster spin the washer acts like an unbalanced tire on a car. Since not the suspension kit, what do I need to look at next?


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

brobriffin		#2 Posted : Thursday, March 2, 2017 4:26:45 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		dosmond please give us you model # for further assistance
		WWW

User Profile View All Posts by User View Thanks

dosmond		#3 Posted : Thursday, March 2, 2017 4:38:36 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 3/1/2017(UTC) Posts: 2		The washer model in question is WTW6700TW2 SN CW5170460


User Profile View All Posts by User View Thanks

brobriffin		#4 Posted : Thursday, March 2, 2017 8:12:57 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		There are a few reasons why the UL occurs and the tub spins off balanced during high spin. 1. The bearings might be going bad. 2. The drive shaft might be bent. both are part of one kit Whirlpool W10435302 Bearing and Tub Seal Kit - AppliancePartsPros.com 3. The basket (inner tub) balance ring might be empty It should have water in it for balance. (Hopefully this is not your problem, very expensive) Whirlpool W10296143 Basket - AppliancePartsPros.com 4. The basket hub assembly might be broken. Whirlpool W10296143 Basket - AppliancePartsPros.com Watch the videos with the listed part number links to see how to access and see if any of these might be your problem.
		WWW

User Profile View All Posts by User View Thanks

brobriffin		#5 Posted : Thursday, March 2, 2017 8:19:02 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		A sign of bearing failure is what appears to be grease splatter under the machine. Inside the Rotor and against the under side of the walls. brobriffin attached the following image(s):
		WWW

User Profile View All Posts by User View Thanks

brobriffin		#6 Posted : Thursday, March 2, 2017 8:22:56 PM(UTC) Quote Multi-Quote
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Also double check that the new suspension rods are the proper strength. Watch these two videos for details to confirm if the rods are good. https://youtu.be/ILYGQ9t0v0Y https://youtu.be/8AvI9ma6rO4
		WWW

User Profile View All Posts by User View Thanks

Quick Reply

Show Quick Reply

Users browsing this topic
Guest

New Topic Post Reply

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close