Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
leday  
#1 Posted : Sunday, February 19, 2017 6:04:53 AM(UTC)
leday

Rank: Member

Groups: Registered
Joined: 2/19/2017(UTC)
Posts: 2

Hi. I have a Maytag Gemini Model MER6772BAB dual oven. It has served me very well over the years. Recently, the right front dual burner has been staying on HIGH heat no matter what setting I dial or what size burner element I select. It turns on and off OK. Just doesn't change from HIGH to a lower temp setting. Whole burner element stays lit All other burners work just fine (i.e. when turning to a lower heat setting, burner will darken, and then cycle on and off to maintain that lower heat level). Front right burner just stays ON. Burned a couple of good strip steaks because of this. Can you help? Thanks.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
ThatGuy  
#2 Posted : Sunday, February 19, 2017 2:23:14 PM(UTC)
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
I'd say its your switch that is bad. You did say it was the dual element switch right? If so, this should be the switch you need.

Whirlpool WP74003122 Switch, Infinite - AppliancePartsPros.com
leday  
#3 Posted : Thursday, February 23, 2017 4:43:54 AM(UTC)
leday

Rank: Member

Groups: Registered
Joined: 2/19/2017(UTC)
Posts: 2

Thank you so much. I'll forward this info on to my husband so we can get this repaired.
Users browsing this topic
Guest (2)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.