Whirlpool washer banging after replacing clutch and coupler - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool washer banging after replacing clutch and coupler Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 8525079	Brand: Whirlpool	Age: 5 - 10 years
Previous Topic Next Topic

Bill Danger		#1 Posted : Wednesday, January 11, 2017 9:03:32 AM(UTC)
Rank: Member Groups: Registered Joined: 1/11/2017(UTC) Posts: 3		I just changed the coupler and clutch on my whirlpool washer because it wasnt spinning. The washer spins now but on high spin the drum starts to bang and shake uncontrolably. Any suggestions to fix this problem. Yes the nachine is balanced.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

ThatGuy		#2 Posted : Wednesday, January 11, 2017 10:15:29 AM(UTC)
Rank: Advanced Member Groups: Expert Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)		Your model number is no good. I can't look up which washer you have.


User Profile View All Posts by User View Thanks

Bill Danger		#3 Posted : Wednesday, January 11, 2017 10:36:49 AM(UTC)
Rank: Member Groups: Registered Joined: 1/11/2017(UTC) Posts: 3		GSW9650LW0 That is what is on the parts manual


User Profile View All Posts by User View Thanks

ThatGuy		#4 Posted : Wednesday, January 11, 2017 2:28:40 PM(UTC)
Rank: Advanced Member Groups: Expert Joined: 7/27/2010(UTC) Posts: 1,395 Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)		Hopefully its on a solid floor and its level with the legs locked. Look at this diagram of the suspension. Parts for Whirlpool GSW9650LW0: Machine Base Parts - AppliancePartsPros.com I'd check parts 16, 17, and 18. All part of the suspension system. Also make sure all four springs are in place.


User Profile View All Posts by User View Thanks

Bill Danger		#5 Posted : Thursday, January 12, 2017 2:26:50 PM(UTC)
Rank: Member Groups: Registered Joined: 1/11/2017(UTC) Posts: 3		The skid plate was out of place. Fixed the issue very quickly. Thank you for your help


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (5)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close