Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
rope13  
#1 Posted : Tuesday, January 10, 2017 3:55:40 PM(UTC)
Quote
rope13

Rank: Member

Groups: Registered
Joined: 1/10/2017(UTC)
Posts: 3

Amana gas stove. Top burners light. Neither the boiler or oven igniter light. I did put in a new oven igniter and still nothing. Any thoughts?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
rope13  
#2 Posted : Tuesday, January 10, 2017 4:08:59 PM(UTC)
Quote
rope13

Rank: Member

Groups: Registered
Joined: 1/10/2017(UTC)
Posts: 3

I replaced the lower element and still the boiler element won't light nor the new lower one.
ThatGuy  
#3 Posted : Tuesday, January 10, 2017 4:13:47 PM(UTC)
Quote
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
Your model number is OK, but to look up your range I need a M.F.G. number something like this....... MFG P1130752NE.

Do your igniters glow at all?

Do you have 120 volts AC to the igniter?

I wonder if there is a thermal fuse?
rope13  
#4 Posted : Tuesday, January 10, 2017 4:26:59 PM(UTC)
Quote
rope13

Rank: Member

Groups: Registered
Joined: 1/10/2017(UTC)
Posts: 3

The igniters don't glow at all. P1130755NE I did put in a new lower igniter.
ThatGuy  
#5 Posted : Wednesday, January 11, 2017 9:08:40 AM(UTC)
Quote
ThatGuy

Rank: Advanced Member

Groups: Expert
Joined: 7/27/2010(UTC)
Posts: 1,395
United States
Location: near the middle of nowhere

Was thanked: 24 time(s) in 24 post(s)
The electronic control board and the gas valve are no longer available for this range.

I have no way of knowing what is wrong with your range without doing some testing with a volt/ohm meter.

If I were there I would be tracing the wiring back from the igniters to the gas valve to the EC board.

I suspect that since both igniters are out, it has to do with the electronic control board. Maybe it has a burnt wire to it or maybe a burnt trace or maybe its just quit.

I wish I had a wiring diagram. Then I could tell you if there is a thermal fuse or safety device inline with the power to the igniters.

Whirlpool 31944801 Erciii, Gas-No Longer Available - AppliancePartsPros.com
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.