Whirlpool Duet Dryer Squeaks/Squeals At Start Up - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Whirlpool Duet Dryer Squeaks/Squeals At Start Up Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: WED9550WR1	Brand: Whirlpool	Age: 1 - 5 years
Previous Topic Next Topic

damianr418		#1 Posted : Saturday, November 5, 2016 6:53:54 PM(UTC)
Rank: Member Groups: Registered Joined: 11/5/2016(UTC) Posts: 2		Greetings! My dryer has started to squeak/squeal for anywhere from a few seconds to around a minute or so at startup. Once it is going for a bit, it stops. In doing some research, I know it can be several things, but wanted to know if there are any troubleshooting tips to narrow down what it may be before I order all of the parts that it could be? I'd rather not have to take it apart more than once if I don't have to as well. And is it possible to get a link or a copy of the service manual so I can follow along to take it apart? I'm leaning towards the belt, pulley assembly, and/or rollers. Any additional assistance would be greatly appreciated. Thanks!


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

brobriffin		#2 Posted : Thursday, November 10, 2016 9:13:08 AM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		Watch the video with this link on disassembly. Whirlpool 661570V Belt - AppliancePartsPros.com You will then be able to check the belt for wear and cracking. You will be able to spin the belt tension pulley and check for wear noise. Whirlpool 279640 Idler Pulley - AppliancePartsPros.com You will be able to check the drum rollers to check for wear and noise. Whirlpool WPW10314173 Drum Support Roller - AppliancePartsPros.com Even if you replaced all four parts; the belt, idler pulley, and two drum rollers, your only looking at about 45 bucks....
		WWW

User Profile View All Posts by User View Thanks

damianr418		#3 Posted : Friday, November 11, 2016 7:15:43 AM(UTC)
Rank: Member Groups: Registered Joined: 11/5/2016(UTC) Posts: 2		Ok. So I have it all taken apart, but nothing is obviously wrong? The belt looks great. the rollers roll smooth and don't make noise. The only thing that maybe is an issue is the idler pulley was tough to turn. It doesn't squeak when I turn it, but it takes some force. Could that be it? Was fairly easy to take apart. I'm going to clean it, and may just order all 4 parts. Thanks!


User Profile View All Posts by User View Thanks

brobriffin		#4 Posted : Friday, November 11, 2016 7:55:13 AM(UTC)
Rank: Member Groups: Registered Joined: 6/13/2014(UTC) Posts: 781 Was thanked: 1 time(s) in 1 post(s)		The idler pulley should spin freely. I suspect it is your problem. I am not sure if you need the drum rollers however a new belt won't be a bad idea since it may have been stretched due to bad idler. Like I said though all 4 only about 45 ain't bad then everything is good for another several years..... Let us know how the repair turns out.
		WWW

User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close