Rank: Member
Groups: Registered
Joined: 10/16/2016(UTC)
Posts: 2
|
Hey guys i have spent 3 days trying to figure out what is going on with my washer. Im getting LF codes and Ld codes. I have checked every suggested check there is. hoses, etc. When i put it in manual mode, i checked every single fuction. They all worked fine. But the washer still will not do it on its on. When i try and start it. It just hums. No water comes in at all. But again in manual mode water comes in and everything works. completly confused. haha
|
|
|
|
|
|
Rank: Advanced Member
Groups: Expert
Joined: 7/27/2010(UTC) Posts: 1,395  Location: near the middle of nowhere Was thanked: 24 time(s) in 24 post(s)
|
I suspect it has to do with the pressure switch or pressure dome, or equivalent parts this machine has. I see the pressure switch is built into this electronic control. W10591280 I would check the tube that comes up to it and I would check for blockages on the other end. On the old machines dirt, mold, lint, or even clothing could block the pressure dome and stop the pressure switch from sensing a drop or rise in the water level. I'm pretty sure that's what is happening here. 
|
|
|
|
|
|
Rank: Member
Groups: Registered
Joined: 10/16/2016(UTC)
Posts: 2
|
thank u for ur time. I blew in the tube from the control board and no restriction. I hate to have to replace the control board but im thinking that is the problem. Not sure though.
|
|
|
|
|
|
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close
