Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
AmyM269  
#1 Posted : Saturday, September 3, 2016 4:22:47 PM(UTC)
Quote
AmyM269

Rank: Member

Groups: Registered
Joined: 9/3/2016(UTC)
Posts: 1

Over the last week I've noticed my clothes are still wet at the end of the wash cycle. After putting my washer on the rinse/spin cycle, that's when i noticed it isn't spinning fast. It will go through the entire wash and tumble like it's supposed to just won't spin the water out. We've pulled the pump and cleaned it out a couple times now so i know it isn't clogged; the water drains fine. Where do i need to stay looking? There's no error codes coming up either.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
brobriffin  
#2 Posted : Monday, September 5, 2016 6:55:20 AM(UTC)
Quote
brobriffin

Rank: Member

Groups: Registered
Joined: 6/13/2014(UTC)
Posts: 781
Man
United States

Was thanked: 1 time(s) in 1 post(s)
Amy to find out if there are any error codes do the following.

Door must be closed and power off (machine in stand by mode, not unplugged)
Press and hold any button (except Start) for 4 seconds
Release for 4 seconds
Press/hold same button for 4 seconds
Release for 4 seconds
Press/hold for 4 seconds

The washer should then light up for 5 seconds and begin to display failure codes before completing the diagnostic test.
Push the same button again to scroll through stored error codes.
List any and all error codes and report back.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.