Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
melissag  
#1 Posted : Sunday, November 1, 2009 2:31:07 AM(UTC)
melissag

Rank: Member

Groups: Registered
Joined: 11/1/2009(UTC)
Posts: 1

Dryer stopped in mid cycle. When the door was open there was no light. It smelled like it was hot. The breaker was checked and there is power to where it is plugged in. HELP!!

Thanks,
Melissa
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Sunday, November 1, 2009 3:18:49 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Replacement parts for PYET4444AYW models | AppliancePartsPros.com

Sounds like the thermal fuse has blown, Item 5 Section 4

Note that it comes with a hi-limit thermostat so both the fuse and the hi-limit should be replaced. The high limit should regulate the temperature and the thermal fuse should not blow unless there is a problem with it or a grounded element.

Also check the following before replacing the fuse:
1. Grounded element. The element either sags or breaks touches the case and it then runs on high without any thermostat regulation. Sometimes you can see this but best way to check is with a meter.
Remove both wires from the heating element. Measure the heater should be about 10 ohms. Then measure from each heater connector to the case/frame both should be open (infinite ohms)
2. Check the drum belt.
3. Clean and check your vent system.
4. Check that the lint filter is not coated with fabric softener residue.
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (3)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.