AppliancePartsPros.com
»
Appliance Repair Help
»
Washer Repair
»
F11 code for maytag 3000 series front end washer
Rank: Member
Groups: Registered
Joined: 12/17/2015(UTC) Posts: 2
|
I have removed all the front screws to get to the central control unit (ccu) but cannot remove the metal plate that is not allowing me to get to the CCU. I want to get to the CCU to check the connections for a F11 error code. Can you help me...thanks
|
|
|
|
Rank: Member
Groups: Registered
Joined: 5/10/2016(UTC) Posts: 2
|
Are you referring to the circuit card in the upper right hand front corner of the washer? If so I had to remover the front panel with the user buttons on it. Then remove some of the screws holding the metal frame in the upper right hand front corner. I could then reach in and release the plastic cover over the circuit card and it came out. After removing all the cables of course. Before I did this I took a picture of the connections.
|
|
|
|
AppliancePartsPros.com
»
Appliance Repair Help
»
Washer Repair
»
F11 code for maytag 3000 series front end washer
Forum Jump
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.
Important Information:
The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies.
More Details
Close