Element not heating- yet all reads okay - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

Element not heating- yet all reads okay Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: KUDS50SVSS4	Brand: Kitchen Aid	Age: 1 - 5 years
Previous Topic Next Topic

FortRepairs		#1 Posted : Tuesday, December 8, 2015 3:30:40 PM(UTC)
Rank: Member Groups: Registered Joined: 12/8/2015(UTC) Posts: 1		Kitchenaid dishwasher Kuds50SVSS4 Element not heating Element tested- 13ohms - good Power supply to element tested - 120V - good Dishwasher rated at 1100 watts Only component between element and control board is the thermostat which reads 0.0 to 0.1 , so its good. Is anyone aware of what I might be overlooking in this situation? Thank you.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Wednesday, December 9, 2015 1:43:45 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Parts for KitchenAid KUDS50SVSS4 Dishwasher - AppliancePartsPros.com Sounds like the control board is shot. I would check the heater circuit at the control board before replacing it. Just to be sure that there is not a bad connection/wire in the circuit. P3 to P9 at the board should give you the 13 ohms.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close