clothes not spinning out fully, runs full cycle - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

clothes not spinning out fully, runs full cycle Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: MAV4057AWW	Brand: Maytag	Age: More than 10 years
Previous Topic Next Topic

jdrax		#1 Posted : Monday, October 26, 2015 1:42:17 PM(UTC)
Rank: Member Groups: Registered Joined: 10/26/2015(UTC) Posts: 1		Our washer has the older style control that has a mechanical timer on the switch instead of any computer board. It goes through the full cycles but does not spin out enough of the water. It also seems to be out of balance a lot and shakes a lot in the spin cycles. I am wondering what parts should be replaced.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

sidfink43		#2 Posted : Wednesday, October 28, 2015 5:15:29 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 3/29/2009(UTC) Posts: 11,699		Spin problems in these models can generally be fixed with this part here, Part number: AP4009132 but the out of balance would still be an issue. After you replace the thrust bearing operate it with the front panel off and see if you can determine if there is a broken support structure piece or bad spring.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (3)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close