Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
dsmines  
#1 Posted : Wednesday, September 16, 2015 12:11:22 PM(UTC)
dsmines

Rank: Member

Groups: Registered
Joined: 9/16/2015(UTC)
Posts: 1

This wknd we unplugged our washer to install laundry room cabinets. When when we plugged it back in, the washer would not do anything and the control panel shows crazy cycles (5.9 instead of 59 minutes for regular/color wash cycle). When we press the 'start/pause' button, the timer will count down to zero, go through all the cycles, but nothing happens.

I tried to enter service mode by pressing 'signal, delay start, signal, delay start' (after unplugging for 30 seconds). It beeps, but will not show anything on the panel

Going crazy trying to figure this thing out. Repair place(s) want $90 + labor + parts. If they can not fix, I still have to pay the $90 for the diagnostic!!

Can anyone help us? Tired of going to coin laundromat...

Thank you in advance for your help and support.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
BillMurphy  
#2 Posted : Sunday, June 4, 2017 3:04:59 PM(UTC)
BillMurphy

Rank: Member

Groups: Registered
Joined: 6/2/2017(UTC)
Posts: 3

Very similar problem here; WCVH6800J1WW won't go into test mode. Even new board won't go into test mode. I can't seem to get any answers either. Can this be fixed?
[FONT=&quot][/FONT]
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.