Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
herman  
#1 Posted : Tuesday, September 8, 2015 11:12:56 AM(UTC)
herman

Rank: Member

Groups: Registered
Joined: 7/20/2007(UTC)
Posts: 64

door will not latch when pushed in. does the micro switch have anything to do with the latch? thank so much for your help
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Wednesday, September 9, 2015 2:20:55 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for Maytag MDBH979AWB3 Dishwasher - AppliancePartsPros.com

The switch just tells the unit that the door is closed.

The problem is most likely mechanical, either the latch plate or the latch itself.
THIS FORUM IS DEAD!!!!!!!
herman  
#3 Posted : Wednesday, September 9, 2015 5:54:24 AM(UTC)
herman

Rank: Member

Groups: Registered
Joined: 7/20/2007(UTC)
Posts: 64

thank you. looking at the latch, i can see two pieces of white plastic. i can't see what pushes the spring loaded one up to catch the inside latch. thank you Dave (herman)
herman  
#4 Posted : Thursday, October 1, 2015 7:47:21 AM(UTC)
herman

Rank: Member

Groups: Registered
Joined: 7/20/2007(UTC)
Posts: 64

maytag dw door latch would not allow dw to close but if i held it shut i would get some lights. i replaced door latch door closed but no lights, nothing just wouldn't start. power ok. i called they said order the control panel i'm not quite sure what to do. also how does that control panel come out, i see tabs on the left but i'm not sure , cause they are hard to push. thank you much for your help dave
denman  
#5 Posted : Friday, October 2, 2015 4:07:52 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Below is a link to the tech sheet.
It is too large to upload to this site so I had to use a third party site.
Uncheck "Use our download manager and get recommended downloads"
This should ensure that you do not download any software that you do not want on your computer
Download SVD48600.pdf

Perhaps the video will help.
Part number: AP4588346
THIS FORUM IS DEAD!!!!!!!
Users browsing this topic
Guest (2)
Similar Topics
Frigidaire dishwasher code A (Dishwasher Repair)
by Evandtam 6/27/2024 5:11:41 PM(UTC)
Fisher Paykel Drawer Dishwasher will not Lock (Dishwasher Repair)
by thompsdw 6/17/2024 7:34:54 AM(UTC)
Dishwasher won't work. (Dishwasher Repair)
by Guest 5/23/2024 6:32:18 PM(UTC)
High-pitched noise with LG dishwasher (Dishwasher Repair)
by Guest 5/17/2024 5:13:53 AM(UTC)
Cafe Dishwasher little to no heat, not cleaning dishes well. (Dishwasher Repair)
by Jtaylor20 5/16/2024 10:15:38 AM(UTC)
Bosch Dishwasher dirty water in filter " hole" (Dishwasher Repair)
by Guest 5/14/2024 9:47:25 AM(UTC)
Bosch dishwasher SHVM78Z53N/01 (Dishwasher Repair)
by Guest 5/8/2024 8:58:29 PM(UTC)
Continuity TEst Samsung p/n 33299012 Dishwasher Water Inlet Valve. (Dishwasher Repair)
by cprodave 4/27/2024 6:55:56 PM(UTC)
Samsung DMT400RHS Dishwasher Over Level Water Error. (Dishwasher Repair)
by cprodave 4/27/2024 6:24:56 PM(UTC)
Samsung Dishwasher Water Inlet Valve--how to Test? (Dishwasher Repair)
by cprodave 4/27/2024 6:18:51 PM(UTC)
Kitchen aid dishwasher bottom leaking (Dishwasher Repair)
by Guest 4/21/2024 10:31:25 AM(UTC)
Bosch Dishwasher SHE3ARF6UC/22 E15 Error (Dishwasher Repair)
by codyace 3/29/2024 11:51:41 AM(UTC)
GE dishwasher GDT695SSJ0SS middle arm not spinning (Dishwasher Repair)
by merrittjr 3/23/2024 10:51:00 AM(UTC)
Bosch Dishwasher Display Goes Out After Latching Door (Dishwasher Repair)
by Guest 3/11/2024 7:00:18 PM(UTC)
Kenmore 90 665 dishwasher noise from impellor (Dishwasher Repair)
by Guest 3/10/2024 12:30:08 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.