Condenser fan not coming on - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Condenser fan not coming on Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: FRS26KW3AQ1	Brand: Frigidaire	Age: More than 10 years
Previous Topic Next Topic

Thomas Long		#1 Posted : Tuesday, June 16, 2015 8:17:00 AM(UTC)
Rank: Member Groups: Registered Joined: 6/16/2015(UTC) Posts: 2		My fridge just stopped working. Heres what I checked:Bimetal sensor (closed when cold open when warm), heating element 28 Ohms, Fan measures 84 ohms and works when connected to AC outside fridge, condenser gets cold when unit plugged in. Does all this point to having a BAD ADC.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Tuesday, June 16, 2015 8:55:38 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts, includes a wiring diagram. Parts for Frigidaire FRS26KW3AQ1 Refrigerator - AppliancePartsPros.com I think you have the evaporator (freezer) and the condenser (under the unit) mixed up. If this is correct then it could be the ADC. It controls the evaporator/freezer fan If the above is not correct then it is probably a wire/connection problem as the condenser fan is wired in parallel with the compressor.
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Thomas Long		#3 Posted : Tuesday, June 16, 2015 9:05:39 AM(UTC)
Rank: Member Groups: Registered Joined: 6/16/2015(UTC) Posts: 2		Ok you are right I had it wrong it is the evaporator. Is there any way to check the ADC board to make sure.


User Profile View All Posts by User View Thanks

denman		#4 Posted : Wednesday, June 17, 2015 2:13:10 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		There is no way to test the ADC. Below is the tech sheet. You could check the wiring for the evaporator fan. Just to be sure that the heater and defrost thermostat and their wiring are OK. http://manuals.frigidaire.com/p...f/Anderson/240389604.pdf
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close