Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
johngaldys@hotmail.com  
#1 Posted : Tuesday, October 27, 2009 12:30:08 PM(UTC)
johngaldys@hotmail.com

Rank: Member

Groups: Registered
Joined: 10/27/2009(UTC)
Posts: 2

I am having difficulty installing the light shield. There are two studs that the shield hangs from but the lower part of the shield does not seem to match up with the slide tray to secure it. I had the same problem with the original part and the bulbs melted it. Do I have the gasket installed correctly? Is there a diagram on how it is to be properly installed?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
johngaldys@hotmail.com  
#2 Posted : Tuesday, October 27, 2009 12:32:47 PM(UTC)
johngaldys@hotmail.com

Rank: Member

Groups: Registered
Joined: 10/27/2009(UTC)
Posts: 2

Originally Posted by: johngaldys@hotmail.com Go to Quoted Post
I am having difficulty installing the light shield. There are two studs that the shield hangs from but the lower part of the shield does not seem to match up with the slide tray to secure it. I had the same problem with the original part and the bulbs melted it. Do I have the gasket installed correctly? Is there a diagram on how it is to be properly installed?

This is a light shield and not part of the ice maker.
Users browsing this topic
Guest (2)
Similar Topics
removal of light shield (Refrigerator & Freezer Repair)
by Marta Land 10/28/2008 3:47:20 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.