Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error

Options
Go to last post Go to first unread
OlneyJeeps  
#1 Posted : Saturday, November 22, 2014 2:47:18 PM(UTC)
OlneyJeeps

Rank: Member

Groups: Registered
Joined: 11/22/2014(UTC)
Posts: 3

Noticed not spinning dry, now not at all
Fills then nothing
Drain spin mode- drains but never switches out of drain (pump runs cont.)
Service mode- no slow or fast agitate, no spin

6 blink ("locked shaft" agitator moves freely
'Reset" open / close lid 5-12 times (tried many times) = no change

64m Ohms (0.00 when tester on ohms) at C7 (supposed to be 97?)

Motor bad?...

Thanks for input / ideas
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
OlneyJeeps  
#2 Posted : Sunday, November 23, 2014 7:42:44 AM(UTC)
OlneyJeeps

Rank: Member

Groups: Registered
Joined: 11/22/2014(UTC)
Posts: 3

Take away my man card.... tester was set on "m"Ohms
OlneyJeeps  
#3 Posted : Thursday, November 27, 2014 5:06:14 AM(UTC)
OlneyJeeps

Rank: Member

Groups: Registered
Joined: 11/22/2014(UTC)
Posts: 3

Wa-hooo! GE service listened to my diagnosis, transfered me to customer care. Customer care took my info, listened to dignosis and sent me a new motor assembly FREE! Installed last night, works great.
Thumbs up for GE customer care!
Users browsing this topic
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.