Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
osterro01  
#1 Posted : Monday, September 15, 2014 4:53:07 AM(UTC)
Quote
osterro01

Rank: Member

Groups: Registered
Joined: 8/7/2013(UTC)
Posts: 2

I've got the installation instruction but can't find the model number. It's a 2000 or 2001 model. Fans are running, etc., but the freezer isn't cold nor is the refrigerator. Any ideas?
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Tuesday, September 16, 2014 1:42:24 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Here are your parts
Parts for KitchenAid KBRS36MHX01 Refrigerator - AppliancePartsPros.com

Since the condenser/compressor fan is running, the compressor should be running.
Check it.
You can usually hear it but also should be able to feel it vibrating.

If it is running remove the cover in the freezer so you can inspect the evaporator coils.
If there is no frost or just frost in one area (usually where the freon enter the coils) then it is a sealed system problem.
This will be an expensive repair as you need a pro.
often it makes more sense to put the dollars towards a new unit.

I am assuming that the compressor runs all the time except when the unit goes through a defrost cycle.
THIS FORUM IS DEAD!!!!!!!
Quick Reply Show Quick Reply
Users browsing this topic
Similar Topics
Kitchen aid built in refrigerator/freezer not cold enough (Refrigerator & Freezer Repair)
by osterro01 9/15/2014 4:14:08 AM(UTC)
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.