No replacement part available - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

No replacement part available Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: 795.78719.803	Brand: Kenmore	Age: 1 - 5 years
Previous Topic Next Topic

BILLY101		#1 Posted : Tuesday, August 12, 2014 4:38:57 PM(UTC)
Rank: Member Groups: Registered Joined: 8/12/2014(UTC) Posts: 3		My refrigerator (Kenmore 785.78719.803) compressor motor will sometimes not start. The motor will hum for a few seconds then stop. After a while it will start. Sometimes the freezer will exhibit frost and soft items. I believe the starter relay is at fault. It could be the compressor. But I would like to replace the starter relay on the chance that the compressor is OK. The compressor is always very hot. However, according to several internet parts providers these parts are no longer available for the starter relay for this unit. Is there a universal starter kit that would work with the compressor? The cat. # for the part is EBB44305402 and is described as a thermistor assmbly. Bill


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Wednesday, August 13, 2014 2:41:35 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		A start device will fail open, but very rarely fail by reducing the start current. You probably have a hard starting compressor with burnt start winding. You can try a universal start device on this, but you will need to take ohms readings with an ohmmeter.


User Profile View All Posts by User View Thanks

BILLY101		#3 Posted : Wednesday, August 13, 2014 2:31:33 PM(UTC)
Rank: Member Groups: Registered Joined: 8/12/2014(UTC) Posts: 3		Thanks for the reply. Today I got a replacement that is very close to original. Whirlpool W10613606. The parts store was able cross it over somehow. The wire connections were not the same but easy to adapt. Fridge seems to be running fine. We shall see how long it lasts. Bill


User Profile View All Posts by User View Thanks

BILLY101		#4 Posted : Saturday, September 13, 2014 11:03:13 AM(UTC)
Rank: Member Groups: Registered Joined: 8/12/2014(UTC) Posts: 3		Compressor is still starting and running ok after 1 month. Bill


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close