Dishwasher is not drying - Appliance Repair Forum - Free Service from Appliance Parts Pros

Welcome Guest! You can not login or register.

Notification

Error

Dishwasher is not drying Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: LDF7810ST	Brand: -other-	Age: 5 - 10 years
Previous Topic Next Topic

Tom Mahoney		#1 Posted : Monday, August 11, 2014 9:23:54 AM(UTC)
Rank: Member Groups: Registered Joined: 8/11/2014(UTC) Posts: 1		I have a LG dishwasher that is drying. I have already replaced the heater element and it still not drying. what part do I need to correct this problem.


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

denman		#2 Posted : Wednesday, August 13, 2014 3:44:35 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 2/29/2008(UTC) Posts: 19,638 Thanks: 1 times Was thanked: 11 time(s) in 11 post(s)		Here are your parts Parts for LG LDF7810ST / ASTEEUS Dishwasher - AppliancePartsPros.com Below is a manual. You will have to join the site and be logged in to be able to download it. http://appliancejunk.com...e&id=51;t=1407929106 I would remove power from the unit and check the heater for continuity with a meter, should be around 12 ohms. It would not be the first time that a part is bad right out of the box. If OK then check the wiring from it up to the control electronics. If all OK then it is probably the control board. Are you sure it is a heater problem or could it be a vent problem?
		THIS FORUM IS DEAD!!!!!!!


User Profile View All Posts by User View Thanks

whjeffs		#3 Posted : Wednesday, August 13, 2014 4:37:40 PM(UTC)
Rank: Member Groups: Registered Joined: 8/14/2012(UTC) Posts: 2		Is your serial number in the 501KWxxxxxxx - 702KWxxxxxxx range? If so, you may have one or more broken wires in the door. Take the outer door off and check if any wires are stuck in the sticky tar-like damping sheet on the inside of the door. If so, you can splice the broken wires or replace the whole wiring harness. Just be sure to protect the wiring from the sticky damping sheet or it will happen again.


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (2)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close