Customer Support 7 days a week

Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

New Topic Post Reply
Options
Go to last post Go to first unread
Judy Cz  
#1 Posted : Friday, July 11, 2014 7:15:57 AM(UTC)
Quote
Judy Cz

Rank: Member

Groups: Registered
Joined: 7/10/2014(UTC)
Posts: 1

My dryer started making the loud screeching noises a few months ago. Looked on your site and ordered the following parts: Dryer belt and tumbler bearings. Excellent videos to help me repair myself. So, turned on the dryer after replacing both - still the loud screeching noise. What else could it be that I could replace on this model? Thanks for your help.
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com
 
denman  
#2 Posted : Friday, July 11, 2014 8:02:05 AM(UTC)
Quote
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
I am assuming that the tumbler bearings you replaced were the front tub support glides.

Other things that can cause a racket are:
The rear support rollers.
The idler wheel
The motor bearings.
Something stuck in the blower
Something stuck between the drum and the units frame. Bra wires are famous for this.
THIS FORUM IS DEAD!!!!!!!
Traveller555  
#3 Posted : Friday, July 11, 2014 11:04:27 AM(UTC)
Quote
Traveller555

Rank: Member

Groups: Registered
Joined: 7/11/2014(UTC)
Posts: 3

I replaced the rollers on mine yesterday and before putting it back together i turned the drive shaft coming from the motor and noticed it was the culprit. You might wanna check that out especially after replacing all that stuff.
Quick Reply Show Quick Reply
Users browsing this topic
New Topic Post Reply
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.