Customer Support 7 days a week

Welcome Guest! You can not login or register.

Notification

Icon
Error
No water coming into dishwasher
Options
Go to last post Go to first unread
Model: 363.1654995 Brand: Kenmore Age: More than 10 years
Previous Topic Next Topic
Lckyctch  
#1 Posted : Wednesday, June 18, 2014 2:25:43 PM(UTC)
Lckyctch

Rank: Member

Groups: Registered
Joined: 4/27/2008(UTC)
Posts: 5
There is no water in the dishwasher and I do not hear the water valve opening. When I unplugged the connection and did a resistance test across the valve solenoid it reads "1" like an open circuit, but occasionally flashes a high number like 160. Am I doing the test right? Would this mean the water valve solenoid is bad? Or might it be the timer control? Is there some other test I should do? Many thanks, this a great website!
Back to top
Sponsor
See inside of your appliance - diagrams and part photos for virtually every model.

powered by AppliancePartsPros.com 		 
Back to top  
Lckyctch  
#2 Posted : Wednesday, June 18, 2014 7:54:17 PM(UTC)
Lckyctch

Rank: Member

Groups: Registered
Joined: 4/27/2008(UTC)
Posts: 5
On further testing I got a resistance of 803 ohms across and 120 volts going into the inlet water valve. Based on a previous post I read, I think I will replace the inlet water valve.
Back to top
natashaB  
#3 Posted : Friday, June 20, 2014 12:22:12 AM(UTC)
natashaB

Rank: Member

Groups: Registered
Joined: 6/20/2014(UTC)
Posts: 4
You can check the connection if it was de-clogged or find someone to fix it.
Back to top
denman  
#4 Posted : Friday, June 20, 2014 4:01:52 AM(UTC)
denman

Rank: Advanced Member

Groups: Senior Expert
Joined: 2/29/2008(UTC)
Posts: 19,638

Thanks: 1 times
Was thanked: 11 time(s) in 11 post(s)
Yes if you get 120 volts across the valve and no water then it is probably the valve.
Part number: AP2039339
Part number: AP2039339


Other possibilities are:

That there is a problem with the hot water supply either the shut off valve or someone has inadvertently shut it off.

Or

The screen filter is clogged solid with gunk.
Most valves have a screen filter built into the input side. It may just need cleaning. Do not permanently remove it from the valve as it is there to keep crud out of the valve which could hold it open and cause a flood.
THIS FORUM IS DEAD!!!!!!!
Back to top
Lckyctch  
#5 Posted : Friday, June 20, 2014 5:22:08 AM(UTC)
Lckyctch

Rank: Member

Groups: Registered
Joined: 4/27/2008(UTC)
Posts: 5
Thank you both for your input. I hope to get the part today and give it a try. I'll report back.
Back to top
Users browsing this topic
Guest (3)
Similar Topics
No Water Coming Into Dishwasher (Dishwasher Repair)
by Momof3Girlz 9/3/2007 5:07:57 PM(UTC)
Forum Jump  
You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Privacy Policy | Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET