GE PROFILE main control board replaced - no cold still - Appliance Repair Forum

Welcome Guest! You can not login or register.

Notification

Error

GE PROFILE main control board replaced - no cold still Options Email this topic Watch this topic Print this topic » Normal Threaded
Model: PFS22MISBWW	Brand: GE	Age: 5 - 10 years
Previous Topic Next Topic

flcowboy		#1 Posted : Monday, June 16, 2014 5:07:01 PM(UTC)
Rank: Member Groups: Registered Joined: 6/16/2014(UTC) Posts: 4		[FONT=&quot]GE Profile Mod#PFS22MISBWW. I replaced the main control board and now the temp is still sitting at 74 degrees. I hear compressor running but no cooling 24 hours later. Temp is the same for freezer and frig. What else could be wrong? Condenser fan is spinning nicely now though. It was only spinning slow only after I gave it a nudge before board replacement. I don't hear any clicking noise and never have this time. I replaced overload relay 2 years ago when it was clicking with no cooling though. I am tired of troubleshooting this pile...oh and the serial is [/FONT] [FONT=&quot]RL050968 (PDF22MIS/PDF22SIS)[/FONT]


User Profile View All Posts by User View Thanks

Sponsor

See inside of your appliance - diagrams and part photos for virtually every model.

richappy		#2 Posted : Tuesday, June 17, 2014 1:37:35 AM(UTC)
Rank: Advanced Member Groups: Senior Expert Joined: 9/10/2007(UTC) Posts: 9,586 Was thanked: 2 time(s) in 2 post(s)		If the compressor is hot and vibrating, you have sealed system problems.


User Profile View All Posts by User View Thanks

flcowboy		#3 Posted : Saturday, June 21, 2014 7:37:42 PM(UTC)
Rank: Member Groups: Registered Joined: 6/16/2014(UTC) Posts: 4		richappy thanks for the reply. I am opting for not paying an HVAC tech to replace my compressor, the price is more than I can bear. I have purchased a brand new LG refrig. I will try my luck with another brand. If I was an insurance adjustor I would total my GE frig. The estimate for an compressor was +$500.


User Profile View All Posts by User View Thanks

flcowboy		#4 Posted : Tuesday, June 24, 2014 5:47:48 PM(UTC)
Rank: Member Groups: Registered Joined: 6/16/2014(UTC) Posts: 4		Does anyone have the same problems I have experienced since replacing main control board of a similar GE Profile refrigerator?


User Profile View All Posts by User View Thanks

Users browsing this topic
Guest (4)

Forum Jump

You can post new topics in this forum.
You can reply to topics in this forum.
You can delete your posts in this forum.
You can edit your posts in this forum.
You cannot create polls in this forum.
You can vote in polls in this forum.

Important Information: The AppliancePartsPros.com uses cookies. By continuing to browse this site, you are agreeing to our use of cookies. More Details Close